Your challenges

High levels of suspended solids and FOG
Many industries struggle with wastewater containing large volumes of suspended solids, fats, oils, and grease (FOG), which are difficult to remove with conventional methods. This not only affects compliance but also overloads downstream treatment. A robust flotation solution is essential to reduce these loads efficiently.
Limited space for treatment infrastructure
Urban or industrial sites often face footprint limitations that make conventional sedimentation tanks unfeasible.
Variable flow and contaminant loads
Changing operational conditions, such as seasonal peaks or shifts in production, can drastically alter the characteristics of wastewater. A flotation system must adapt automatically to fluctuating flows and contamination levels without compromising performance.
Sludge handling and disposal costs
Dissolved Air Flotation systems generate sludge with an approx. 7% of dry solids content. When the sludge is not treated, there’s a higher amount of cost of disposal due to the high amount of water.
How can NSI meet your needs?
Nijhuis IPF & NPF (stainless steel flotation basin)
The NPF flotation system uses plate pack technology to maximize separation surface in a compact design. With high overflow rates and solids loading , it offers flotation solution with reliable performance and space –savings.
Designed for large industrial flows, the NPF-HX delivers superior capacity with even higher overflow rates and full automatic level control. It is highly adaptable to changing influent hydraulic conditions and wastewater properties.
Nijhuis HRC DAF (reinforced concrete flotation basin)
High Rate Concrete (HRC) DAF is Ideal for large scale drinking water, municipal and industrial applications, it , handles typically the flows ranging from 1,065 to 3,500 m³/h per bay.
Nijhuis GDF (stainless steel flotation basin)
GDF flotation is perfect for highly polluted wastewater with significant sludge loadings. It operates at low overflow rates and is highly effective for applications involving activated sludge or emulsified oils.
FlooDAF® (stainless steel flotation basin)
FlooDAF® achieves high separation efficiency. Its single-level low construction and highly efficient dispersion water system ensure a small footprint and reduced civil works costs. FlooDAF® flotation unit is used for treating high flowrate of wastewater and has good tolerance for hydraulic and influent solid variations, low maintenance requirements, and comprehensive aftermarket care.
Vacuum Airlift Technology (VAL)
Vacuum Airlift Technology 9VAL) patented by Coldep, uses Vacuum pressure combined with microbubble injection to achieve highly efficient contaminant separation, making it ideal for aquaculture and industrial wastewater applications.

Do you want to know more about the NSI i-DAF Flotation solutions?
Our solutions
- Municipal
- Industrial
DAF – Nijhuis HRC DAF (reinforced concrete flotation basin)
- Industrial water
- Drinking water
- Wastewater
The Nijhuis HRC DAF is a powerful and compact solution for removing solids from water and wastewater. Designed for large flow rates and small loads and built in concrete basins, (...)
- Municipal
- Industrial
DAF – FlooDaf®
- Process water
- Industrial water
- Resource Recovery
- Wastewater
- Sludge
- Drinking water
A high-capacity, compact flotation solution for various large-scale water and wastewater treatment applications enabling raw material recovery, decreased water consumption and (...)
- Municipal
- Industrial
DAF – Nijhuis IPF-NPF
- Wastewater
- Drinking water
- Industrial water
The Nijhuis NPF and IPF units are advances dissolved air flotation (DAF) systems designed for efficient separation of suspended solids, oils, greases, and flocculated particles (...)
- Municipal
- Industrial
DAF – Nijhuis GDF
- Wastewater
- Drinking water
- Industrial water
- Sludge
The Nijhuis GDF units are high-performance Dissolved Air Flotation (DAF) systems designed to separate suspended solids, oils, greases, and flocculated particles from industrial (...)
- Municipal
- Industrial
VAL – Vacuum Air Lift technology
- Industrial water
- Wastewater
- PFAS
To remove suspended particles, concentrate pollutants and regulate dissolved gases in water, the innovative VAL (Vacuum Air Lift Technology) combines vacuum, microbubble flotation (...)
Customer benefits

High removal efficiency
All our DAF units are designed to remove over 90% of suspended solids and Fats, Oils, and Grease (FOG), ensuring compliance with discharge limits and protecting downstream equipment.
Flexible design for any industry
From food processing to municipal treatment, our range of Dissolved Air Flotation systems offers solutions tailored to specific industries, wastewater characteristics, and operational requirements.
Reduced footprint and installation cost
Our plate pack and high-rate systems minimize space requirements, making them ideal for retrofits or installations in areas with limited footprint availability.
Improved sludge management
Our flotation systems enhance sludge management by efficiently handling high solids loads and seamlessly integrating with dewatering systems, thereby reducing sludge handling and transport costs.
Adaptability and automation
Advanced level control and adaptable design allow consistent performance even under variable flow or shock load conditions, reducing operator involvement.
References
- Food & Beverage
Wastewater treatment for ice cream production to ensure regulatory compliance – Unilever
Project’s context and challenges
Responding to recent changes in local wastewater management, Unilever is developing a dedicated wastewater treatment plant (WWTP) for its Ice Cream production facility in Çorlu. Previously, the facility directed two wastewater streams through a Dissolved Air Flotation (DAF) unit for pre-treatment, then transferred the flow to the adjacent Margarine Plant WWTP for full treatment and discharge into the river. However, since a new owner acquired the Margarine Plant, external treatment is no longer available.
To gain full control over wastewater processing and ensure regulatory compliance, Unilever has chosen to build its own on-site biological treatment system. Under the new setup, the wastewater will receive biological treatment on-site before Unilever discharges it into the Organized Industrial Zone’s sewer system for final centralized treatment.
- Food & Beverage
Wastewater pretreatment for airline catering to ensure long-term compliance – KLM Catering Services
- Municipal
- Municipal drinking water
Concrete desalination DAF for water utility to strengthen drinking water security – Marina East
Context
To enhance water security and climate resilience, Singapore developed the Marina East Desalination Plant — the first dual-mode facility capable of treating both seawater and freshwater from the Marina Reservoir. Located in the heart of the city, the plant required a compact, energy-efficient, and future-ready solution to meet the nation’s growing water demands while minimizing environmental impact.
Solution
Nijhuis Saur Industries (NSI), part of Saur Group, designed and delivered eight High Rate concrete i-DAF modules as pre-treatment for the Marina East Desalination Plant. The system includes coagulant and flocculant dosing, top mixers, corrugated plate packs, skimmer systems, and the Nijhuis i-AERATION flotation system. The i-DOSE intelligent dosing control ensures stable effluent quality and optimized chemical usage. The plant integrates ultrafiltration and reverse osmosis for final treatment, enabling dual-mode operation with high efficiency.
- Municipal
- Municipal drinking water
Seawater pretreatment solution for desalination – The Wave
The Wave Desalination Plant is one of Abu Dhabi’s flagship desalination developments, designed to provide a reliable source of freshwater for the region. To support large-scale seawater desalination, the project required an advanced pretreatment solution capable of handling fluctuating seawater conditions while ensuring consistent water quality for downstream membrane filtration.
Seawater quality can vary significantly due to seasonal algal blooms, suspended solids, and changing environmental conditions. Without effective pretreatment, these fluctuations can reduce reverse osmosis membrane performance, increase maintenance requirements, and drive up operating costs.
To address these challenges, The Wave selected Nijhuis Saur Industries to deliver a high-performance High-Rate Dissolved Air Flotation (HR-DAF) pretreatment system. The solution was designed to provide robust solids removal, protect critical membrane assets, and support reliable freshwater production at a treatment capacity exceeding 110 million imperial gallons per day (approximately 500,000 m³/day).
- Industrial
- Energy
Wastewater treatment and resource recovery for biofuel to reduce environmental impact – ORLEN
Context
To support its biofuel production and environmental goals, ORLEN Południe S.A. invested in a state-of-the-art wastewater treatment plant at its Trzebinia site. The facility needed to treat complex wastewater streams—including industrial, rainwater, and biodiesel effluents—while recovering valuable resources and minimizing environmental impact. The challenge was to deliver a fully automated, safe, and efficient system that could handle diverse influents and support heat and energy recovery.
Solution
Nijhuis Saur Industries (NSI), part of Saur Group, designed and delivered a turnkey wastewater treatment plant for ORLEN Południe S.A. The system integrates multiple treatment stages including CPI separation, flocculation, dissolved air flotation (DAF), biological MBBR, and anaerobic digestion (ECONVERT-DGF). The plant is fully automated and includes intelligent monitoring to ensure optimal performance and environmental compliance. Biogas generated from sludge digestion is reused for heating, supporting ORLEN’s sustainability goals.
- Fish processing
- Industrial
Wastewater treatment for Aquaculture to improve environmental performance – Australis
- Industrial
- Energy
Wastewater pretreatment for energy production to increase treatment capacity and reliability – Orlen
The expansion of Orlen’s wastewater treatment facilities marks another important step in strengthening the company’s environmental performance and operational reliability. At the heart of this success is the implementation of the Nijhuis HR-DAF (High-Rate Dissolved Air Flotation) system, delivered by NSI CE, which combines proven engineering with tailored, client-focused solutions.
The project realization faced some challenges from the start: strict Oil & Gas standards, tight delivery timelines, and the need for uninterrupted refinery operations during construction. However, due to the common efforts of dedicated and expert teams involved, the project was completed within the revised deadline and budget. Proactive approach demonstrated by NSI CE team during project execution was highly appreciated by the client.
As part of the order NSI CE team provides also technological support for Orlen for the period of 3 years after take-over, including periodical visits of NSI CE engineer on site.
Contact our experts
Frequently Asked Questions (FAQ)
GDF is an open tank flotation unit designed for highly contaminated water and high solids loading, whereas IPF and NPF flotation units are equipped with plate pack technology for compact, efficient separation in low to medium solids-loaded streams.
Yes, flotation systems like NPF-HX, HRC –DAF, VAL and FlooDAF® are designed to handle fluctuations in influent flow and solids loading, delivering robust and consistent performance across a wide range of operating conditions.
Our experienced engineering team will assess your wastewater characteristics, hydraulic conditions and available footprint to identify the optimal DAF solution for your application. Pilot testing, on-site jar testing, and laboratory analysis are available to verify process performance and optimize the final design.