Contact us

Your challenges

Recovering more value from wastewater

Municipal wastewater treatment plants face increasing pressure to improve efficiency, reduce environmental impact and recover valuable resources from wastewater streams.

Rising sludge treatment costs

Cellulose accounts for a significant share of incoming suspended solids and contributes directly to sludge production. As sludge handling, transportation and disposal costs continue to increase, utilities are looking for ways to reduce the amount of material entering sludge treatment processes.

Valuable resources are lost

Without dedicated cellulose recovery technology, valuable cellulose remains part of the treatment process and ultimately leaves the plant through sludge stream rather than being recoverd and reused.

Increasing sustainability ambitions

Municipalities are expected to support circular economy objectives, reduce waste generation and maximize resource recovery from existing infrastructure.

Optimizing treatment performance

Reducing suspended solids at the beginning of the treatment process can reduce downstream treatment loads and support efficient plant operation.

How does it work?

Our process

Advanced cellulose recovery with CellCap®

CellCap® cellulose recovery combines advanced screening, washing and dewatering technologies to recover cellulose before it enters downstream treatment processes. The result is a reusable raw material while reducing the amount of cellulose entering sludge treatment processes. It is a complete cellulose recovery solution designed to recover valuable cellulose from municipal wastewater treatment plants.

Fine screening (IntenSieve®)

The process starts with advanced fine screening technology that captures recoverable cellulose from incoming municipal wastewater while maintaining the hydraulic performance. Capturing cellulose at the front-end of the treatment process helps reduce the load on downstream biological treatment.

Washing and separation (CellWash®)

The captured screenings are washed and separated, allowing cellulose to be recovered while unwanted materials such as plastics, hair, leaves, seeds and other debris are removed. This creates two valuable output streams, recovered cellulose for reuse and organic-rich residual stream.

Dewatering (CellPress®)

The recovered cellulose is dewatered into a stable product with a dry solids concentration of up to 35-40%, creating a reusable raw material suitable for a wide range of applications.

Resource recovery

The organic-rich residual stream can be directed to anaerobic digestion, creating opportunities for biogas production and further increasing resource recovery from municipal wastewater.

Our positive impact

Proven cellulose recovery expertise

NSI helps utilities recover value from municipal wastewater through proven cellulose recovery technology and extensive wastewater treatment expertise.

Built on proven CellCap® technology

Developed specifically for recovering cellulose while creating opportunities for biogas production through the valorization of the residual stream.

Flexible implementation

Suitable for both new wastewater treatment plants for retrofit projects.

End-to-end support

From design and implementation to optimization and long-term operation.

Download our guide to cellulose recovering

Key figures

Up to 35-40%

Dry solids ratio cellulose

10% to 20%

Increase treatment capacity by approximately

Approx 2.5 tonnes

Avoid CO₂- equivalent emissions

References with IntenSieve

  • Industrial
  • Food & Beverage
the Netherlands

Wastewater fine screening and solids thickening for vegetable processing to reduce discharge costs

The client processes large volumes of fresh vegetables for the food industry. Every day, around 80 trucks deliver approximately 3,600 pallets of vegetables, which are prepared across 16 production lines operating continuously.

The production process generates significant amounts of vegetable waste. Around 30,000 kg of vegetable waste per day enters the water circulating through the factory’s gutters, creating a wastewater stream with a high suspended solids load. Approximately 80 m³/h of water is discharged continuously, with peak flows reaching up to 170 m³/h.

The client was investigation ways to remove more suspended solids before discharge. Reducing the amount of solids in the wastewater could lower discharge costs, prevent solids from settling in the drainage system, and create a more efficient wastewater management process.

More about this reference
  • Municipal
  • Municipal wastewater
Almere, the Netherlands

Decentralized sewage treatment for residential communities to recover resources and remove micropollutants – Oosterwold

The Oosterwold district in Almere is a unique residential area where sustainability, self-sufficiency and innovation are central design principles. To support this vision, a decentralised sewage treatment plant was developed to serve approximately 800 households. The challenge was to create a compact, future-proof system that not only treats wastewater safely, but also recovers valuable resources and removes micro-pollutants such as pharmaceutical residues.

In a consortium with Royal Oosterhof Holman (main contractor), Akanova and Van Remmen UV Technology, CirTec played a key role in delivering an innovative solution. The system had to perform reliably under fluctuating influent conditions while meeting strict environmental and water quality requirements. The municipality of Almere deliberately chose an unconventional approach, pushing technological boundaries to realise a sustainable, circular water treatment concept.

More about this reference
  • Municipal wastewater
Beemster, the Netherlands

Fine screening for expansion of sewage treatment plant to increase capacity – WWTP Beemster

Municipal sewage treatment plants across Europe are increasingly under pressure due to rapid urbanization and population growth. WWTP Beemster, located in the heart of a protected UNESCO area, faced significant operational challenges as existing infrastructure was pushed to the limits of  its design capacity. Conventional solutions such as expanding biological treatment or installing Primary Settling Tanks (PSTs) were impractical due to high costs, long construction timelines, and severe space limitations.

The challenge was to implement a cost-effective, space-efficient, and easy-to-integrate solution that would reduce operational strain, improve compliance with discharge standards, and future-proof the plant for growing loads—all without major civil works.

More about this reference
Apeldoorn, the Netherlands

Fine screening for industrial manufacturing to meet stringent discharge requirements

A global manufacturer of glass fibre materials for industrial and building applications generates a chemically contaminated wastewater stream during production, containing highly variable concentrations of glass fibres and polyvinyl alcohol (PVA).

Due to tightening municipal discharge requirements, the local authority mandated a significant reduction of fibre content in the wastewater to below 300 mg/l. The main challenge was to reliably treat fluctuating flows and loads, while ensuring stable compliance with discharge limits—without disrupting production or requiring extensive changes to the existing wastewater infrastructure.

More about this reference
Tangier, Morocco

Wastewater treatment for seafood processing to meet discharge requirements

Shrimp peeling operations generate wastewater with high concentrations of suspended solids and organic load. If not treated effectively, this wastewater can place significant pressure on downstream treatment processes and pose a risk to surface water quality.

A shrimp processing company faced the challenge of achieving strict discharge compliance while maintaining a reliable, low-maintenance treatment process. The solution needed to be compact, energy-efficient, and capable of removing fine particles and organic matter without complex operation or high operational costs.

More about this reference
"Recovering cellulose from a sewage treatment plant is no longer a future concept. Today, wastewater treatment plants can capture this valuable resource before it is degraded or disposed of with sludge, transforming an overlooked waste stream into valuable raw material for industry. "

Contact our experts

Frequently asked questions

Cellulose recovery is the process of recovering cellulose from municipal wastewater before it enters downstream treatment processes. Instead of ending up in sludge steams, the recovered cellulose can be reused as a valuable raw material.